Different Conditions Used

Ceramic tile is probably one of the most banal and clear of construction materials. For all that, it has several core options, given that it is easy to assess the suitability of it or not. Facing Tiles – mass species, the experts grouped her on a variety of criteria. Others have come much simpler approach to the choice in terms of "like – not like that." Such an approach is usually acceptable, but must take into account individual circumstances in order to avoid the most common mistakes. First and foremost, you must determine the location of the tiles (outside, inside the house, in a room with high humidity …). Paving ceramic tiles – very durable and solid.

If you respect the rules of styling, the tensile strength of the material collected by the load factor of 10-20 covers the potential of reinforced concrete or cement. Even under extreme loads tile does not bend or warp. For all that, under certain conditions, ceramic tile is destroyed without any load and foreign "aid". For example, from the cold. Like every other ceramics, tiles absorb moisture. Therefore, a tile that has a high rate of water absorption at temperatures below zero breaks. It must take into account those who intend to coat ceramic Unglazed or glazed "over-year" balcony. Lending. Various types of tiles have different markings moisture absorption.

The smaller the group number, the lower water absorption, thus, more stability in the cold. When choosing ceramic tiles for the floor it makes sense draw attention to another significant figure – abrasion resistance. There are five groups of tiles: from PEI-I to the PEI-V. Most vulnerable to abrasion of the first group, the fifth – the most stable. For residential premises appropriate to apply tile third group. For assistance, try visiting Sean Rad. In the office again – more resistant tiles. For wall tiling the kitchen, usually suits Tile lower strength class. Again, it is desirable that the thermal resistance of all the tiles for the kitchen should not be less than 125 C. If you do not comply with this condition, the tiles may eventually cause small cracks, which further lead to its destruction. Tile for the pool should contain as little as possible and then voids. In carrying out these conditions of humidity rises. But the biggest trouble, which hides a swimming pool, are microorganisms that make the pool surface slippery. They settled in the pores and cavities of the pool tiles, destroy and make it more fragile. On the external appearance tiles also have the appropriate rules. Form of tiles should correspond with the size and the rules of geometry. On the surface of the tiles are not allowed external defects such as streaks, whitish edges or fine web of cracks. Make sure that the tile perfectly flat, you can get it out of the box, resting on a flat surface and at a time by clicking on the corners. Then you have to turn over and re-establish action again. If any of the edges will be raised, therefore, there is a breach of the geometry. When raspollozhenii tiles close to each other in the areas of their connections are not allowed any irregularities. We advise buying tile-established organizations, such as granite Keope. These tiles manufacturers pay much attention to the quality of its tiles. At all stages of production, strict control, in the manufacture use only the best materials.

WordPress theme: Kippis 1.15

© 2012-2018 FCS Virginia All Rights Reserved -- Copyright notice by Blog Copyright